焊接参数对Au80Sn20焊料封装孔洞和微观组织的影响

doi:10.16257/j.cnki.1681-1070.2022.0414

电子与封装 ›› 2022, Vol. 22 ›› Issue (4): 040203 . doi: 10.16257/j.cnki.1681-1070.2022.0414

焊接参数对Au80Sn20焊料封装孔洞和微观组织的影响

颜炎洪¹;徐衡¹;王英华²;陈旭¹;李守委¹;刘立恩²

1.中科芯集成电路有限公司，江苏无锡 ?214072; 2.无锡中微高科电子有限公司，江苏无锡 ?214035

收稿日期:2021-09-16 出版日期:2022-04-25 发布日期:2021-11-24
作者简介:颜炎洪（1991—），男，江苏无锡人，硕士，从事微电子封装相关工作。

Effect of Soldering Parameters on Pores and Microstructureof Au80Sn20 Solder Package

YAN Yanhong¹, XU Heng¹, WANG Yinghua², CHEN Xu¹, LI Shouwei¹, LIU Lien²

1. China KeySystem &Integrated Circuit Co., Ltd., Wuxi 214072,China; 2. Wuxi ZhongweiHigh-tech Electronics Co., Ltd., Wuxi 214035, China

Received:2021-09-16 Online:2022-04-25 Published:2021-11-24

摘要/Abstract

摘要： 气密性封装工艺广泛应用于高可靠电子元器件。目前陶瓷产品的气密性封装主要采用Au80Sn20合金作为连接材料将盖板和管壳进行密封，Au80Sn20合金中Au与Sn元素的质量分数分别为80%和20%，是金锡二元合金的共晶成份，目的是在较低的温度和最短的时间内发生共晶反应，形成良好的密封结构。采用Au80Sn20合金对DIP20陶瓷管壳与盖板进行气密性封装，通过微观组织表征与X-ray测试观察金属间化合物的状态和元素分布，研究不同焊接温度和焊接压力对Au80Sn20合金焊接孔洞和微观组织的影响。在焊接峰值温度和焊接压力两个关键因素上进行优化，得出了减少气密性封装孔洞的最佳工艺参数组合，提高了Au80Sn20焊料气密性封装的可靠性，有助于提高元器件封装质量，在行业内具有一定的指导意义。

关键词: 气密性封装, 孔洞, 工艺参数, 最佳效果

Abstract: Airtight packaging technology is widely used in highly reliable electronic components. At present, the hermetic encapsulation of ceramic products often uses Au80Sn20 alloy as the connecting material to seal the cover plate and pipe shell. The mass fractions of Au and Sn in Au80Sn20 alloy respectively are 80% and 20%, which is the eutectic component of gold-tin binary alloy. The purpose is to form a good sealing structure by eutectic reaction at a lower temperature and in the shortest time. In this paper, DIP20 ceramic cartridge and cover plate which are sealed by Au80Sn20 alloy and observation of the state and element distribution of intermetal compounds by microtissue characterization and X-ray test to study the effect of different welding temperature and pressure on the welding pores and microstructure of Au80Sn20 alloy. By the optimization of the two key factors, peak welding temperature and welding pressure, we get the optimal combination of process parameters of reducing airtight packaging pores. It improves the reliability of Au80Sn20 solder airtight packaging, and it is helpful to improve the packaging quality of components and has certain guiding significance in the industry.

Key words: airtightpackaging, pores, technologicalparameters, optimaleffect

中图分类号:

TN305.94

颜炎洪;徐衡;王英华;陈旭;李守委;刘立恩. 焊接参数对Au80Sn20焊料封装孔洞和微观组织的影响[J]. 电子与封装, 2022, 22(4): 040203 .

YAN Yanhong, XU Heng, WANG Yinghua, CHEN Xu, LI Shouwei, LIU Lien. Effect of Soldering Parameters on Pores and Microstructureof Au80Sn20 Solder Package[J]. Electronics & Packaging, 2022, 22(4): 040203 .

参考文献

[1] JIANG NAN, ZHANG LIANG, LIU ZHIQUAN. Reliability issues of lead-free solder joints in electronic devices[J].Science and Technology of Advanced Materials, 2019, 20(1): 876-901.
[2] GOODMAN PAUL. Current and future uses of gold in electronics[J]. Gold bulletin, 2002, 35(1): 21-26.
[3] 姚立华，吴礼群，蔡昱. 采用金锡合金的气密性封装工艺研究[J]. 电子工艺技术, 2010, 31(5): 267-270.
[4] GHOSH C. Interdiffusion study in binary gold–tin system[J]. Intermetallics, 2010, 18(11): 2178-2182.
[5] 马艳艳，赵鹤然，田爱民，等. AuSn焊料在集成电路密封中形成空洞的研究[J]. 电子与封装, 2021, 21(5): 050206.
[6] DONG H ,VUORINEN V , LAURILA T , et al. Microstructural evolution and mechanical properties in (AuSn)eut-Cu interconnections[J]. Journal of Electronic Materials, 2016, 45(10): 5478-5486.
[7] ZHAO H R, KANG M, CAO L H, et al. Analysis of influence of process parameters on microstructure of welds in AuSn Seals[C]//2019 20th International Conference on Electronic Packaging Technology (ICEPT).IEEE, 2019: 1-4.
[8] GHOSH C. Interdiffusion study in binary gold–tin system[J]. Intermetallics, 2010, 18(11): 2178-2182.
[9] ZHAO H R, KANG M, CAO L H, et al. Analysis of microcavity morphology and formation mechanism in AuSn solder ring seal[C]// 2019 20th International Conference on Electronic Packaging Technology(ICEPT)，2019.
[10] CIULIK J, NOTIS M R. The Au-Sn phase diagram[J]. Journal of alloys and compounds, 1993, 191(1): 71-78.
[11] YOON J W, JUNG S B. Investigation of interfacial reaction between Au–Sn solder and Kovar for hermetic sealing application[J]. Microelectronic Engineering, 2007, 84(11): 2634-2639.
[12] SHEEN M T, HO Y H, WANG C L, et al. The joint strength and microstructure of fluxless Au/Sn solders in InP-based laser diode packages[J]. Journal of Electronic Materials, 2005, 34(10): 1318-1323.
[13] HO B, YIHSING. The study of microstructure and joint strength for fluxless AuSn solders in laser diode package[J]. Electro-Optical Engineering, 2003.
[14] 陈松，刘泽光，陈登权，等. Au/Sn界面互扩散特征[J]. 稀有金属, 2005, 29(4): 413-417.

中文引用格式：颜炎洪，徐衡，王英华，等. 焊接参数对Au80Sn20焊料封装孔洞和微观组织的影响[J]. 电子与封装，2022, 22(4): 040203.
英文引用格式: YAN Yanhong, XU Heng, WANG Yinghua, et al. Effect of soldering parameters on pores and microstructure of Au80Sn20 solder package[J]. Electronics & Packaging, 2022, 22(4): 040203.
最新录用说明：
此版本为经同行评议被本刊正式录用的文章。其内容、版式可能与正式出版（印刷版）稍有差异，正式出版后此版本会更新，请以正式出版版本为准。本文已确定卷期、页码以及DOI，可以根据DOI引用。
本文尚未正式出版，未经许可，不得转载。

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

焊接参数对Au80Sn20焊料封装孔洞和微观组织的影响

Effect of Soldering Parameters on Pores and Microstructureof Au80Sn20 Solder Package

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	颜炎洪;徐衡;王成迁. 气密性平行缝焊盐雾腐蚀机理研究[J]. 电子与封装, 2020, 20(11): 110201-.
[2]	陈曦，甘志华，苗春蕾. HTCC产品气密性封装的平行缝焊工艺研究[J]. 电子与封装, 2019, 19(10): 8-12.