中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

导航

电子与封装 ›› 2016, Vol. 16 ›› Issue (11): 27 -30. doi: 10.16257/j.cnki.1681-1070.2016.0128

• 电路设计 • 上一篇    下一篇

一种用于高度表测量系统的射频前端收发组件

蔡 茂,潘 碑,郁 健,马建军,温艳兵   

  1. 南京电子器件研究所,南京 210016
  • 出版日期:2016-11-20 发布日期:2016-11-20
  • 作者简介:蔡茂(1981—),男,四川简阳人,中国电子科技集团公司第55研究所工程师,从事微波电路设计与研究; 潘碑(1981—),男,四川泸州人,中国电子科技集团公司第55研究所高级工程师,从事微波电路设计与研究; 郁健(1972—),男,江苏启东人,中国电子科技集团公司第55研究所高级工程师,从事微波电路设计与研究; 马建军(1965—),男,江西南昌人,中国电子科技集团公司第55研究所研究员级工程师,从事微波电路设计与研究; 温艳兵(1980—),男,山西太谷人,中国电子科技集团公司第55研究所高级工程师,从事微波电路设计与研究。

A Design of RF Front-end TR Module for Altimeter Measuring System

CAI Mao, PAN Bei, YU Jian, MA Jianjun, WEN Yanbing   

  1. Nanjing Electronic Devices Institute, Nanjing 210016, China
  • Online:2016-11-20 Published:2016-11-20

摘要: 简要介绍了高度表测量系统用射频前端收发组件的设计方案。详细阐述了主要功能单元电路和重要技术指标的设计考虑。该射频前端达到的指标为:输出发射功率大于16 W,输出功率全温稳定性小于0.1 d B/10℃,收发隔离大于112 d Bc,端口泄漏小于34 d BμV等。

关键词: 高度表测量系统, 射频前端收发组件, 发射功率, 输出功率全温稳定性, 收发隔离, 端口泄露

Abstract: The paper briefly introduces a design of the RF front-end TR module for altimeter measuring system. The design of main functional circuit along with the technological indicators is discussed in details. The RF front-end achieves an output transmit power of 16W and higher; the whole temperature stability for output power is less than 0.1dB/10℃; the transmit-receive isolation is greater than 112dBc and the port leakage is below 34 dBμV.

Key words: altimeter measuring system, RF front-end TR module, transmit power, whole temperature stability for output power, transmit-receive isolation, port leakage

中图分类号: