中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

导航

电子与封装 ›› 2019, Vol. 19 ›› Issue (3): 021 -25. doi: 10.16257/j.cnki.1681-1070.2019.0029

• 电路设计 • 上一篇    下一篇

基于低成本MCU的无线充电发射端设计

刘明峰,程 涛,罗 明   

  1. 无锡中微爱芯电子有限公司,江苏 无锡 214072
  • 出版日期:2019-03-20 发布日期:2020-01-16
  • 作者简介:刘明峰(1976—),男,江苏仪征人,中共党员,硕士研究生,高级工程师,1999年毕业于南通工学院电气技术专业,2012年江苏大学硕士研究生毕业,现任无锡中微爱芯电子有限公司总经理,历年来负责和主持完成了MCU、LCD系列电路、内置肖特基的高速接口电路、集团内数字电话专用集成电路等电路的开发。

Design of Wireless Charging Transmitter Based on Lowcost MCU

LIU Mingfeng , CHENG Tao,LUO Ming   

  1. Wuxi I-CORE Electronics CO., LTD., Wuxi 214072, China
  • Online:2019-03-20 Published:2020-01-16

摘要: 随着智能手机的不断更新换代,设备功耗越来越大,充电次数也逐渐增多,传统的充电器和电线使充电受到较大约束,这给无线充电技术的发展提供了契机。介绍了无线充电系统的工作原理及系统的基本结构,并结合项目需求选取了基于Qi协议的无线充电方案并进行研究。最终该系统基于低成本的MCU,实现异物检测(FOD)、Qi协议传输等功能,实现了5 W无线充电的低成本应用。

关键词: 无线充电;低成本;异物检测;Qi协议传输

Abstract: With the continuous updata of smart phones, the power consumption of devices is getting larger and larger, and the charging frequency is also increasing gradually. Traditional chargers and wires restrict the charging, which provides an opportunity for the development of wireless charging technology. This paper mainly introduces the principle of the wireless charging system and the basic structure of the system, and selects and studies the wireless charging scheme based on Qi protocol according to the project requirements. Finally, the system which is Based on the lowcost MCU, implements the functions of FOD and Qi protocol transmission and the realizes lowcost application of 5 W wireless charging.

Key words: wireless charging; inexpensive; FOD; Qi protocol transmission

中图分类号: