热固性环氧导电胶的失效机理分析

doi:10.16257/j.cnki.1681-1070.2021.0711

电子与封装 ›› 2021, Vol. 21 ›› Issue (7): 070402 . doi: 10.16257/j.cnki.1681-1070.2021.0711

热固性环氧导电胶的失效机理分析

井津域;刘德喜;史磊;景翠;康楠

北京遥测技术研究所，北京　100094

收稿日期:2021-01-26 出版日期:2021-07-22 发布日期:2021-04-25
作者简介:井津域（1993—），男，陕西商洛人，硕士研究生，工程师，研究领域为射频微波组件微组装工艺研发、先进封装工艺设计、先进封装可靠性及材料研究。

Failure Mechanism of Thermosetting EpoxyConductive Adhesive

JING Jinyu, LIU Dexi, SHI Lei, JING Cui, KANG Nan

Beijing Research Instituteof Telemetry, Beijing 100094, China

Received:2021-01-26 Online:2021-07-22 Published:2021-04-25

摘要/Abstract

摘要： 对热固性环氧导电胶在常温环境及高温环境下的失效过程进行了研究。研究显示，导电胶在常温下6~7 h内，其内部组分性能稳定，具有较好的流动性。回温时间超过7 h，工艺稳定性变差，这是由于导电胶内部稀释剂不断挥发，导致树脂基体在高温下难以形成稳定的三维空间结构。固化后导电胶加热至190 ℃以上，材料内部发生了Ag元素的富集，导致内应力增大。长时间加热导电胶，Ag元素会发生氧化反应，导致胶体表面氧元素增加。

关键词: 导电胶, 可靠性, 挥发, 三维结构, 银富集, 氧化反应

Abstract: In this study, the failure process and mechanism of thermosetting epoxy conductive adhesive is analyzed at room temperature and high temperature. The results show that the epoxy adhesive conserves stability and good fluidity within 6~7 hours at room temperature. However, the stability and the fluidity degrades with the recovery time exceeds 7 hours at room temperature. Due to the continuous evaporation of solvent inside the epoxy conductive adhesive, the resin matrix is difficult to form a stable 3D structure at high temperature. SEM results show Ag enrichment in the seams of resin matrix when the cured epoxy adhesive re-heated above 190 ℃. And if the epoxy adhesive is heated for a long time, the Ag will be oxidized, resulting an increase of Oxygen on the surface of the adhesive.

Key words: epoxyadhesive, stability, evaporation, threedimensionalstructure, Agenrichment, oxidationreaction

中图分类号:

TN454

井津域;刘德喜;史磊;景翠;康楠. 热固性环氧导电胶的失效机理分析[J]. 电子与封装, 2021, 21(7): 070402 .

JING Jinyu, LIU Dexi, SHI Lei, JING Cui, KANG Nan. Failure Mechanism of Thermosetting EpoxyConductive Adhesive[J]. Electronics & Packaging, 2021, 21(7): 070402 .

参考文献

[1] ZHANG D, GAO H, Gao L L, et al. Uniaxial ratcheting behavior of hygrothermal aging anisotropic conductive adhesive film[J]. Polymer Testing, 2013, 32:1545-1550.
[2] 李文, 李阳阳, 朱晨俊，等. 导电胶粘接片式器件侧边胶量仿真优化与验证[J]. 电子与封装, , 2020, 20(6): 060402.
[3] 柯杨船. 聚合物纳米复合材料[M]. 北京:科学出版社, 2009:199-200.
[4] 韩延康. 高性能导电银胶的制备与研究[D]. 中国石油大学, 2017.
[5] ZHANG S, XU X, LIN T, HE P. Recent advances in nano-materials for packaging of electronic devices[J]. Journal of Materials Science: Materials in Electronics, 2019, 30(15): 13855–13868.
[6] WANG Q, ZHANG S, LIU G, et al. The mixture of silver nanowires and nanosilver-coated copper micronflakes for electrically conductive adhesives to achieve high electrical conductivity with low percolation threshold[J]. Journal of Alloys and Compounds, 2020, 820: 153184.
[7] ZHANG S, QI X, YANG M, et al. A study on the resistivity and mechanical properties of modified nano-Ag coated Cu particles in electrically conductive adhesives[J]. Journal of Materials Science: Materials in Electronics, 2019, 30(10): 9171-9183.
[8] 张墅野, 许孙武, 曹洋，等. 新型导电胶中铜粉表面化学镀纳米银颗粒的导电机理研究[J]. 焊接, 2019（2）：1-5.
[9] WANG Q, ZHANG S, LIN T, et al. Highly mechanical and high-temperature properties of Cu–Cu joints using citrate-
coated nanosized Ag paste in air[J]. Progress in Natural Science: Materials International, 2021.
[10] ZHANG S, WANG Q, LIN T, et al. Cu-Cu joining using citrate coated ultra-small nano-silver pastes[J]. Journal of Manufacturing Processes, 2021(62): 546-554.
[11] GAZIT N, KLINGER L, RABKIN E. Chemically-induced solid-state dewetting of thin Au film[J]. Acta Materialia, 2017.
[12] 张栋. 各向异性导电胶膜的棘轮变形及粘接性能研究[D]. 天津：天津大学, 2014.
[13] GAO L L, XU C, ZHANG S B, et al. Machanical properties of anisotropic conductive film with strain rate and temperature[J]. Materials Science and Engineering A, 2009, 513-514:216-221.
[14] ZHANG S, YANG M, WU Y, et al. A study on the optimization of anisotropic conductive films for Sn-3Ag-0.5Cu-based flex-on-board application at a 250 °C bonding temperature[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2018, 8(3): 383-391.
[15] ZHANG S, LIN T, HE P, et al. A study on the bonding conditions and nonconductive filler contents on cationic epoxy-based Sn-58Bi solder ACFs joints for reliable flex-on-board applications[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2017, 7(12): 2087-2094.
[16] ZHANG S, LIN T, HE P, et al. Effects of acrylic adhesives property and optimized bonding parameters on Sn–58Bi solder joint morphology for flex-on-board assembly[J]. Microelectronics Reliability, 2017, 78: 181-189.
[17] RAO Z Z, BAO S X, LAI W M, et al. Discoloration mechanism of silver-filled adhesive used for packaging solder joint[C]// The 12th International Conference on Electronic Packaging Technology & High Density Packaging, ICEPT-HDP 2012 Proceedings, 874-876.

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

热固性环氧导电胶的失效机理分析

Failure Mechanism of Thermosetting EpoxyConductive Adhesive

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘少红；谭淇. 芯片返修回流焊可靠性改善研究进展[J]. 电子与封装, 2022, 22(8): 80206-.
[2]	张贺;冯佳运;丛森;王尚;安荣;吴朗;田艳红. 表面贴装锡基焊点长期贮存可靠性及寿命预测研究[J]. 电子与封装, 2022, 22(7): 70201-.
[3]	张建;王道畅;金家富;董玉;李静. 多芯片组件导电胶接触电阻增大案例分析^*[J]. 电子与封装, 2022, 22(6): 60203-.
[4]	白志强, 张玉明, 汤晓燕, 沈应喆, 徐会源. 4H-SiC功率MOSFET可靠性研究进展^*[J]. 电子与封装, 2022, 22(4): 40101-.
[5]	胡敏;彭俊睿. 肖特基二极管高温反向偏置失效分析与改善[J]. 电子与封装, 2022, 22(3): 30401-.
[6]	胡敏. LDO失效分析及改善[J]. 电子与封装, 2022, 22(1): 10206-.
[7]	张潇睿. 基于不同键合参数的Cu-Sn-Cu微凸点失效模式分析[J]. 电子与封装, 2022, 22(1): 10201-.
[8]	张景波;朱亚男;彭春雨;赵强. 高可靠性的读写分离14T存储单元设计*[J]. 电子与封装, 2022, 22(1): 10303-.
[9]	李苗;孙晓伟;宋惠东;程明生. CBGA器件焊接工艺与焊点失效分析[J]. 电子与封装, 2021, 21(8): 80203-.
[10]	徐庆升;陈悦霖. 热超声键合第二焊点研究进展[J]. 电子与封装, 2021, 21(7): 70204-.
[11]	李菁萱;谢晓辰;王胜杰;林鹏荣;王勇. 陶瓷柱栅阵列封装电路器件级热学环境可靠性评估[J]. 电子与封装, 2021, 21(5): 50201-.
[12]	吕晓瑞;林鹏荣;王勇;刘建松;杨俊. 铜带缠绕型焊柱装联结构的板级热-机械可靠性研究[J]. 电子与封装, 2021, 21(3): 30203-.
[13]	张筱迪,毛明晖,卢昶衡,王文武,贾冯睿,龙旭. 基于有限元分析和机器学习的跌落所致封装结构力学行为预测[J]. 电子与封装, 2021, 21(2): 20204-.
[14]	朱晨俊;李慧;伍艺龙;董东;张平升. 陶瓷基板溢胶机理分析及改善方法研究[J]. 电子与封装, 2021, 21(11): 110203-.
[15]	张阳;王党会;郑俊娜. MOSFET器件质量与可靠性的互补表征体系研究[J]. 电子与封装, 2021, 21(11): 110405-.