中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

导航

电子与封装 ›› 2021, Vol. 21 ›› Issue (11): 110303 . doi: 10.16257/j.cnki.1681-1070.2021.1107

• 电路设计 • 上一篇    下一篇

一种低功耗无运放结构的基准电压源设计

黄祥林;李富华;宋爱武   

  1. 苏州大学电子信息学院,江苏 苏州 215000
  • 收稿日期:2021-03-04 出版日期:2021-11-24 发布日期:2021-05-31
  • 作者简介:黄祥林(1996—),男,江西赣州人,硕士研究生,现从事模拟IC芯片的研究与设计。

Design of a Voltage Reference Source with LowPower Consumption and no Operational Amplifier Structure

HUANG Xianglin, LI Fuhua, SONG Aiwu   

  1. School of Electronic andInformation Engineering, Soochow University, Suzhou 215000, China
  • Received:2021-03-04 Online:2021-11-24 Published:2021-05-31

摘要: ?运用工作在亚阈值区的MOS管,产生了一个温度系数良好的基准电压,同时在输出支路使用共源共栅结构,使该电压基准源的电源抑制比得到有效提高。基于0.18 μm CMOS工艺,使用Cadence中Spectre环境进行仿真,在标准TT工艺下,该电压基准源在-40~125 ℃的温度范围内,基准电压的变化仅为1.627 mV,温度系数为9.56×10-6/℃,电源抑制比为-72.11 dB,使用5 V电源电压供电时,此电压基准源整体只消耗了164.8 nA的电流,功耗仅为0.824 μW。该基准电路不仅结构简单,还具有低功耗、高电源抑制比、无运放结构的优点。

关键词: ?电压基准源, 亚阈值区, 低功耗, 高电源抑制比, 无运放结构

Abstract: Using the MOS tube working in the sub-threshold region, a reference voltage with good temperature coefficient is generated, and at the same time, the cascode structure is used in the output branch, so that the power supply rejection ratio of the voltage reference source is effectively improved. Based on the 0.18 μm COMS process, using the Spectre environment in Cadence for simulation, under the standard TT process, the voltage reference source is within the temperature range of -40-125 ℃, the reference voltage changes only 1.627 mV, and the temperature coefficient is 9.56×10-6/℃, the power supply rejection ratio is -72.11 dB, when using a 5 V power supply voltage, the voltage reference source consumes only 164.8 nA of current as a whole, and the power consumption is only 0.824 μW. The reference circuit is not only simple in structure, but also has the advantages of low power consumption, high power supply rejection ratio, and no operational amplifier structure.

Key words: voltagereferencesource, sub-thresholdarea, lowpowerconsumption, highpowersupplyrejectionratio, nooperationalamplifierstructure

中图分类号: