中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

导航

电子与封装 ›› 2018, Vol. 18 ›› Issue (3): 26 -28. doi: 10.16257/j.cnki.1681-1070.2018.0029

• 电路设计 • 上一篇    下一篇

一款多通道双模导航信道模块的设计

夏永平,魏斌,孙淼   

  1. 中国电子科技集团公司第五十八研究所,江苏 无锡 214072
  • 收稿日期:2017-07-17 出版日期:2018-03-20 发布日期:2018-03-20
  • 作者简介:夏永平(1973—),男,重庆铜梁人,本科,高级工程师,现工作于中国电科第58研究所模块事业部,主要研究方向为射频微波模块、组件设计。

Design of a Multi-channel Transmitting and Receiving Module for a Dual-mode Navigation System

XIA Yongping,WEI Bin,SUN Miao   

  1. China Electronics Technology Group Corporation No.58 Research Institute,Wuxi 214072,China
  • Received:2017-07-17 Online:2018-03-20 Published:2018-03-20

摘要: 介绍了一款多通道的北斗/GLONASS双模导航信道模块的设计和研制。模块有4个接收下变频通道,可同时接收北斗和GLONASS信号,通过滤波、变频、放大,输出带有限幅功能的中频信号,高隔离度地分离出2种共8路不同模式的导航信号。此外还有2个上变频通道,把2个中频信号上变频到北斗和GLONASS频率,混合输出。该模块的通道隔离度达70dB以上,在输出功率-5dBm时,三阶交调达到-60 dBc,具有良好的线性指标。

关键词: 多通道, 导航, 高隔离度

Abstract: In this paper,a multi-channel transmitting and receiving module used in BeiDou and GLONASS navigation system is designed and implemented.The module is consisted by four down converter receiving channels and two up converter transmitting channels.The receiving channels receive BD and GLONASS signals at same time,and output the high isolated navigation signals for both modes by filtering,mixing,amplifying,and limiting.The up converter channels convert two IF signals to BD and GLONASS frequencies,and output at same port.The isolation index of each channels achieves 70 dB,and at-5 dBm output power,the third-order intermodulation is above -60 dBc, which shows the good linearity index of thismodule.

Key words: multi-channel, navigation, high-isolation

中图分类号: