基于HTCC的200 Gbit/s光调制器外壳的研制

doi:10.16257/j.cnki.1681-1070.2023.0090

电子与封装 ›› 2023, Vol. 23 ›› Issue (7): 070402 . doi: 10.16257/j.cnki.1681-1070.2023.0090

基于HTCC的200 Gbit/s光调制器外壳的研制

胡进;颜汇锃;陈寰贝

南京电子器件研究所，南京 210016

收稿日期:2023-01-04 出版日期:2023-07-26 发布日期:2023-06-19
作者简介:胡进（1981—），男，江苏南京人，本科，高级工程师，研究方向为微波封装外壳设计与工艺。

Development of 200 Gbit/s Optical Modulator Package Based on HTCC Technology

HU Jin, YAN Huizeng, CHEN Huanbei

Nanjing Electronic Devices Institute, Nanjing210016,China

Received:2023-01-04 Online:2023-07-26 Published:2023-06-19

摘要/Abstract

摘要： 研制了一款基于高温共烧陶瓷（HTCC）工艺的光调制器外壳，通过高速端口实现信号的传输。端口的设计采用共面波导结构的水平传输和类同轴结构的垂直传输，并分析高速信号传输通道的等效电路和在频域上的仿真，实现端口的阻抗匹配，在保证信号完整性的前提下端口可以实现单通道28Gbit/s的高速信号传输。将相同条件下的差分过孔结构与类同轴结构在频域和时域下展开分析，验证了类同轴结构可以更有效地保证信号完整性。将探针测试与背靠背结构相结合的方式对样品进行测试，验证了高速端口可以在保证信号完整性的前提下实现单通道28Gbit/s的高速信号传输速率。将该结构应用在8通道的光调制器外壳上，可以支持200Gbit/s以上的高速信号传输。

关键词: 光调制器外壳, 高温共烧陶瓷, 信号完整性, GSSG探针

Abstract: An optical modulator package based on high-temperature co-fired ceramic (HTCC) process is researchedfor signal transmission through a high-speed port.The horizontal transmission of the coplanar waveguide structure and the vertical transmission of the coaxial-like structure is applied in the high-speed port. By analyzing its equivalent circuit? of the high-speed signal transmission channel and and simulating in frequency domain to realize the impedance matching of the port, the port can realize the high-speed signal transmission of 28 Gbit/s in a single-channel under the premise of ensuring the signal integrity.The differential vias structure and coaxial-like structure under the same conditions are analyzed in frequency domain and time domain. It is verified that the coaxial-like structure has better transmission characteristics and can more effectively ensure the signal integrity.The probe test is combined with the back-to-back structure to test the samples, it is verified that the high-speed port can realize a high-speed signal transmission rate of 28 Gbit/s for a single channel under the premise of ensuring signal integrity. The structure is applied to the eight-channel package of optical module, which can support high-speed signal transmission above 200 Gbit/s.

Key words: optical modulator package, HTCC, signal integrity, GSSGprobe

中图分类号:

TN454

胡进;颜汇锃;陈寰贝. 基于HTCC的200 Gbit/s光调制器外壳的研制[J]. 电子与封装, 2023, 23(7): 070402 .

HU Jin, YAN Huizeng, CHEN Huanbei. Development of 200 Gbit/s Optical Modulator Package Based on HTCC Technology[J]. Electronics & Packaging, 2023, 23(7): 070402 .

参考文献

[1] SHIUE G H, YEH C L, LIU L S et al. Influence and mitigation of longest differential via stubs on transmission waveform and eye diagram in a thick multilayered PCB[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2014, 4 (10): 1657-1670.
[2] 纪成光，秦典成，陈正清，等.差分过孔焊环及反焊环对高速信号完整性影响的实验研究[J].电子器件, 2020, 43(2):456-461.
[3] YAN H Z, CHEN HB, ZHOU H,et al. 4×56Gbps High-speed ceramic package applied to optical communication[C]//2022 International Conference on Wireless Communication and Sensor Networks,Dalian,2022: 154-159.
[4] SHEN Z W,TONG J. Signal integrity analysis of high?speed single?ended and differential vias[C]// 2008 10th Electronics Packaging Technology Conference, Singapore, IEEE, 2008: 65?70.
[5] BO P, KIM K H, KIM SY, et al. Modeling and parameter extraction of coplanar symmetrical meander lines[J].IEEE Transactions on Electromagnetic Compatibility, 2015, 57(3): 375-383.
[6] LAERMANS E, GEEST J D, ZUTTER D D,etal. Modeling differential via holes[J]. IEEE Transactions on Advanced Packaging, 2001, 24(3):357-363.
[7] JIN S, ZHANG J, LIM J, et al. Analytical equivalent circuit modeling for multiple core vias in a high-speed package[C]// IEEE International Symposium on Electromagnetic Compatibility, Ottawa, IEEE, 2016.
[8] 李永彬，周昊，钱志宇，等.一种应用于18GHz功放模块的陶瓷外壳设计[J].固体电子学研究与进展,2016,36(5):398-401.
[9] 颜汇锃，施梦侨，周昊，等. X波段功率器件外壳端口仿真与测试差异性研究[J].电子技术应用,2022, 48(4): 98-103.
[10] 严冬，张盈利，陈杨杨，等.高速PCB中差分过孔的分析与优化[J].电子测量与技术学报,2020, 34(1): 90-96.
[11] 赵玲宝，陈清华.差分过孔的高频特性仿真分析[J].电讯技术，2014, 54(4): 518-523.
[12] 纪成光，秦典成，陈正清，等.差分过孔焊环及反焊环对高速信号完整性影响的实验研究[J].电子器件，2020, 43(2): 456-461.

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

基于HTCC的200 Gbit/s光调制器外壳的研制

Development of 200 Gbit/s Optical Modulator Package Based on HTCC Technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	李开杰;林凡淼;郁文君;张恒. 万兆网卡设计中PCIE 4.0接口信号完整性仿真分析[J]. 电子与封装, 2022, 22(12): 120301-.
[2]	周立彦;汤文学;庞影影;王剑峰;王波. 封装设计中传输线损耗的理论计算[J]. 电子与封装, 2022, 22(11): 110204-.
[3]	张小蝶;邱颖霞;许聪;邢正伟. 基于SiP技术多片DDR3高速动态存储器设计[J]. 电子与封装, 2022, 22(1): 10302-.
[4]	曾燕萍, 张景辉, 朱旻琦, 顾林. 3D异构集成的多层级协同仿真[J]. 电子与封装, 2021, 21(10): 100105-.
[5]	曾燕萍;张景辉;王梦雅;孙晓冬;曹春雨. DDR3堆叠键合组件的信号完整性分析与优化[J]. 电子与封装, 2020, 20(12): 120201-.
[6]	陈曦，甘志华，苗春蕾. HTCC产品气密性封装的平行缝焊工艺研究[J]. 电子与封装, 2019, 19(10): 8-12.
[7]	滕丽. 一种高速互连通道的信号完整性仿真研究[J]. 电子与封装, 2018, 18(12): 37-40.
[8]	唐利锋, 程　凯, 庞学满, 张鹏飞. 高温共烧陶瓷金属化膜厚影响因素分析[J]. 电子与封装, 2018, 18(10): 1-3.
[9]	刘琦，刘卫东，陈兴隆，王昕捷. 基板非圆过孔的信号完整性和电源完整性研究[J]. 电子与封装, 2017, 17(12): 5-8.
[10]	潘结斌，陈计学，姜　楠. 一种用于微波控制电路控制端口的静电/浪涌电压泄放结构[J]. 电子与封装, 2016, 16(11): 31-34.