[1] HAN S, WANG K K. Analysis of the flow of encapsulant during underfill encapsulation of flip-chips[J]. IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, 1997,20(4):424-433. [2] 李菁萱, 林鹏荣, 黄颖卓, 等. 助焊剂残留对底部填充粘接强度的影响[J]. 电子与封装, 2019,19(1):1-3. [3] KIM Y B, SUNG J. Capillary-driven micro flows for the underfill process in microelectronics packaging[J]. Journal of Mechanical Science and Technology, 2012,26(12):3751-3759. [4] WANG J L. The effects of rheological and wetting properties on underfill filler settling and flow voids in flip chip packages[J]. Microelectronics Reliability, 2007,47(12):1958-1966. [5] WU K T, HWANG S J, LEE H H. Mechanism of Void Prediction in Flip Chip Packages with Molded Underfill[J]. Journal of Electronic Materials, 2017,46(8):5094-5106. [6] 李菁萱, 刘沛, 练滨浩, 等.陶瓷表面状态对底部填充胶流动性影响研究[J]. 电子与封装, 2018,18(3):1-4. [7] 冯春苗, 张欲欣, 付博彬.军用倒装焊器件底部填充胶选型及验证方法讨论[J]. 电子与封装, 2020,20(5):050201. [8] 苌凤义.芯片级封装底部填充胶水的评估[D].苏州:苏州大学, 2005. [9] 张良明.影响倒装芯片底部填充胶流动的因素分析[J].材料研究与应用, 2008(2):151-154. [10] 罗琬.环氧树脂复合材料的流变特性及底部填充工艺研究[D].武汉: 华中科技大学, 2017. [11] 何素敏.一种快速流动可低温固化的底部填充胶[D].广州:华南理工大学, 2009. [12] KORNAIN Z, JALAR A, RASHID R, et al. An optimization of two-steps curing profile to eliminate voids formation in underfill epoxy for hi-cte flip chip packaging[J]. Advanced Materials Research, 2010(97-101):23-27. [13] WANG K J, BALACHANDRAN R, WAGIMAN A N R. Underfill flow void solutions through process and materials interaction[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2014,4(12):1999-2003. [14] GUO X R, YOUNG W B. Vacuum effect on the void formation of the molded underfill process in flip chip packaging[J]. Microelectronics Reliability, 2015(55):613-622. [15] DIOP, DIOBET M, DANOVITCH, et al. Void-free underfill process with variable frequency microwave for higher throughput in large flip chip package application[J]. IEEE Transactions on Device & Materials Reliability, 2015,15(2):250-257. |