镍电极MLCC排胶后残碳量及其电性能研究

doi:10.16257/j.cnki.1681-1070.2025.0003

电子与封装 ›› 2025, Vol. 25 ›› Issue (1): 010401 . doi: 10.16257/j.cnki.1681-1070.2025.0003

镍电极MLCC排胶后残碳量及其电性能研究

蒋晋东¹，易凤举²，陈沫言²，程淇俊²

1. 中国航天宇航元器件工程中心，北京? 100094；2. 成都宏科电子科技有限公司，成都? 610100

收稿日期:2024-05-30 出版日期:2025-01-22 发布日期:2025-01-22
作者简介:蒋晋东（1986—），女，山东菏泽人，硕士，高级工程师，研究方向为宇航用元器件的制造与应用；易凤举（1981—），男，四川泸州人，学士，工程师，研究方向为多层陶瓷电容器的制造与研究。

Research on Residual Carbon Content and Electrical Properties of Nickel Electrode MLCC After Glue Removal

JIANG Jindong¹, YI Fengju², CHEN Moyan², CHENG Qijun²

1. China Aerospace Components EngineeringCenter, Beijing 100094, China; 2.Chengdu Hongke Electronic Technology Co.,Ltd., Chengdu 610100, China

Received:2024-05-30 Online:2025-01-22 Published:2025-01-22

摘要/Abstract

摘要： 多层陶瓷电容（MLCC）固有的坯体有机物残留导致产品可靠性低，其主要原因是排胶不充分。通过改变排胶工序的不同工艺条件，使用硫碳分析仪对排胶后坯体残碳量进行量化，结合破坏性物理分析、扫描电镜对烧成后的产品进行结构分析，并对成品进行电性能测试，探索残碳量与成品的电极连续性、电性能及可靠性之间的联系。结果表明通过增大气体交换、降低排胶升温速率、延长保温时间等手段可有效降低排胶后的残碳量，烧成MLCC的内电极连续性变得更好，容量和击穿电压等电性能数据得到提升，介质层变得更致密，使用寿命延长。所探讨的测定排胶充分性以及增加排胶充分性的方法可为MLCC工业生产中的排胶作业提供参考。

关键词: MLCC, 残碳量, 排胶, 电极连续性, 电性能

Abstract: The inherent organic residue in the green body of multi-layer ceramic capacitors (MLCC) leads to low product reliability, which is mainly due to insufficient glue removal. By changing the different process conditions of the glue removal step, the residual carbon content of the green body after glue removal is quantified using a sulfur carbon analyzer. Combined with destructive physical analysis and scanning electron microscopy, the structure of the fired product is analyzed, and the electrical performance of the finished product is tested to explore the relationship between residual carbon content and the electrode continuity, electrical performance, and reliability of the finished product. The results show that the residual carbon content after glue removal can be effectively reduced by increasing gas exchange, reducing the heating rate of glue removal, and extending holding time. The continuity of the internal electrode of the fired MLCC becomes better, and the electrical performance data such as capacity and breakdown voltage are improved. The dielectric layer becomes denser and the service life becomes longer. The discussed methods for determining the adequacy of glue removal and increasing the adequacy of glue removal can provide a reference for glue removal operations in MLCC industrial production.

Key words: MLCC, residual carbon content, glue removal, electrode continuity, electrical performance

中图分类号:

TN305

蒋晋东，易凤举，陈沫言，程淇俊. 镍电极MLCC排胶后残碳量及其电性能研究[J]. 电子与封装, 2025, 25(1): 010401 .

JIANG Jindong, YI Fengju, CHEN Moyan, CHENG Qijun. Research on Residual Carbon Content and Electrical Properties of Nickel Electrode MLCC After Glue Removal[J]. Electronics & Packaging, 2025, 25(1): 010401 .

参考文献

[1] 李美娟, 白罗, 张颖, 等. 高电容且稳定钛酸钡基多层陶瓷电容器综述[J]. 中国陶瓷, 2022, 58(2): 7-19.
[2] 王俊波. 多层陶瓷电容器的技术现状及未来发展趋势[J]. 绝缘材料, 2008, 41(3): 30-32, 36.
[3] 任艳, 王健, 方栓柱, 等. MLCC产业现状及质量分析[J]. 电子产品可靠性与环境试验, 2023, 41(1): 84-89.
[4] GONG H L, WANG X H, ZHANG S P, et al. Grain size effect on electrical and reliability characteristics of modified fine-grained BaTiO3 ceramics for MLCCs[J]. Journal of the European Ceramic Society, 2014, 34(7): 1733-1739.
[5] ZHANG Y C, WANG X H, KIM J Y, et al. High performance BaTiO3-based BME-MLCC nanopowder prepared by aqueous chemical coating method[J]. Journal of the American Ceramic Society, 2012, 95(5): 1628-1633.
[6] 钟建薇, 梁力平. 多层片式瓷介电容器贱金属电极的制造方法[J]. 电子元件与材料, 2004, 23(12): 32-35.
[7] ANGERMANN H H, YANG F K, VAN DER BIEST O. Removal of low molecular weight components during thermal debinding of powder compacts[J]. Journal of Materials Science, 1992, 27(9): 2534-2538.
[8] LEWIS J A, CIMA M J. Diffusivities of dialkyl phthalates in plasticized poly(vinyl butyral): impact on binder thermolysis[J]. Journal of the American Ceramic Society, 1990, 73(9): 2702-2707.
[9] CIMA M J, LEWIS J A, DEVOE A D. Binder distribution in ceramic greenware during thermolysis[J]. Journal of the American Ceramic Society, 1989, 72(7): 1192-1199.
[10] 张尹, 赖永雄, 肖培义, 等. MLCC制造中产生内部开裂的研究[J]. 电子元件与材料, 2005, 24(5): 52-54.
[11] 赖永雄, 唐浩, 李基森. Ni/Cu电极MLCC烧成工艺的研究[J]. 电子元件与材料, 2005, 24(7): 21-24.
[12] OHJI T. Additive manufacturing of ceramic components[J]. Synthesiology English Edition, 2019, 11(2): 81-92.
[13] 戴承萍. 一种测定电子陶瓷产品排胶效果的方法：CN201711117092.1 [P]. 2018-03-23.
[14] 沈志平,周敬,王翔,等. 一种测定电子陶瓷产品排胶效果的方法：CN201410015011.7 [P]. 2016-08-31.
[15] DAS A, MADRAS G, DASGUPTA N, et al. Binder removal studies in ceramic thick shapes made by laminated object manufacturing[J]. Journal of the European Ceramic Society, 2003, 23(7): 1013-1017.
[16] 陈长云, 李筱瑜, 刘新. MLCC内电极厚度对其性能影响的研究[J]. 电子工艺技术, 2011, 32(2): 105-107.
[17] POLOTAI A V, SHAY D P, YANG G Y, et al. Stability of Ni electrodes and Ni-BaTiO3 interface evolution in ultrathin BME MLCCs[C]//2008 17th IEEE International Symposium on the Applications of Ferroelectrics, Santa Re, NM, USA, 2008.
[18] YOON J R, SHIN D S, JEONG D Y, et al. Control of connectivity of Ni electrode with heating rates during sintering and electrical properties in BaTiO3 Based multilayer ceramic capacitors[J]. Transactions on Electrical and Electronic Materials, 2012, 13(4): 181-184.
[19] LIU D. Highly Accelerated life stress testing (HALST) of base-metal electrode multilayer ceramic capacitors[C]// CARTS International 2013: The 33rd Symposium for Passive Electronic Components, Houston, Texas, USA, 2013.
[20] CHENG Q J, HUANG L D, XU H, et al. The influence of particle size of slurry on life on BME-MLCC[J]. International Journal of Applied Ceramic Technology, 2019, 16(4): 1632-1638.
[21] 蔡弘, 桂治轮, 李龙土. 复合X7R多层陶瓷电容器[J]. 无机材料学报, 2000, 15(6): 1117-1122.

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

镍电极MLCC排胶后残碳量及其电性能研究

Research on Residual Carbon Content and Electrical Properties of Nickel Electrode MLCC After Glue Removal

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	曹二平, 蔡晓东, 牟海燕. 不同规格色素炭黑对环氧塑封料性能的影响[J]. 电子与封装, 2022, 22(9): 90206-.
[2]	崔朝探, 陈政, 杜鹏搏, 焦雪龙, 曲韩宾. X波段小型封装GaN功率放大器设计 [J]. 电子与封装, 2022, 22(6): 60202-.
[3]	赵丹, 邹嘉佳, 方南军. 微波复合介质板的介电性能验证研究[J]. 电子与封装, 2020, 20(1): 10101-.
[4]	王鹢奇. 基于0.13 μm工艺的1.5 V低功耗MOSFET器件设计[J]. 电子与封装, 2019, 19(1): 37-40.