先进制程芯片失效定位技术现状及发展*

doi:10.16257/j.cnki.1681-1070.2024.0041

摘要/Abstract

摘要： 芯片工艺节点从2011年的28/22 nm、2015年的16/14 nm正向3/2 nm演进，晶体管的结构也由平面金属氧化物半导体场效应晶体管（MOSFET）转向立体的鳍式场效应晶体管（FinFET）。失效定位是芯片失效分析中承上启下的关键一步，随着芯片工艺制程的减小、晶体管结构的转变，传统失效定位技术在定位精度上已不能满足需求。为适应市场变化，先进制程芯片的失效定位技术也有了对应的发展和突破。重点介绍了先进制程芯片中常见的电子、光学失效定位技术，通过原理、案例明确各种技术的优缺点及优先适用的失效模式，并对未来的定位技术发展进行了展望。

关键词: 失效分析, 先进制程芯片, 电子失效定位, 光学失效定位

Abstract: The chip process node is evolving from 28/22 nm in 2011 and 16/14 nm in 2015 to 3/2 nm，and the transistor structure is also changing from planar metal-oxide-semiconductor field-effect transistor (MOSFET) to three-dimensional fin-type field-effect transistor (FinFET). Failure localization is a key step in chip failure analysis, and the traditional failure localization technology can no longer meet the demand in terms of localization accuracy with the reduction of chip process and the transformation of transistor structure. In order to meet the market change, the failure localization technology of advanced process chips has also made corresponding development and breakthrough. Common electronic and optical failure localization technologies for advanced process chips are highlighted, the advantages and disadvantages of various technologies and the preferred failure modes are clarified through principles and cases, and the future development of localization technology is envisioned.

Key words: failure analysis, advanced process chip, electronic failure localization, optical failure localization

中图分类号:

TN406

李振远,徐昊,贾沛,万永康,张凯虹,孟智超. 先进制程芯片失效定位技术现状及发展^*[J]. 电子与封装, 2024, 24(4): 040402 .

LI Zhenyuan, XU Hao, JIA Pei, WAN Yongkang, ZHANG Kaihong, MENG Zhichao. Current Status and Development of Advanced Process Chip Failure Localization Technology[J]. Electronics & Packaging, 2024, 24(4): 040402 .

参考文献

[1] CHIN J M, NARANG V, ZHAO X L, et al. Fault isolation in semiconductor product, process, physical and package failure analysis: importance and overview[J]. Microelectronics Reliability, 2011, 51(9-11): 1440-1448.
[2] 罗道军, 倪毅强, 何亮, 等. 电子元器件失效分析的过去、现在和未来[J]. 电子产品可靠性与环境试验, 2021, 39(S2): 8-15.
[3] 张墅野, 李振锋, 何鹏. 微系统三维异质异构集成研究进展[J]. 电子与封装, 2021, 21(10): 100106.
[4] 陈选龙, 王有亮, 方建明, 等. 集成电路失效定位技术现状和发展趋势[J]. 半导体技术, 2020, 45(5): 329-337.
[5] RIVAI F, NG P T, MA Y Z, et al. Application of EBIC and EBAC for nanoscale fault isolation of FEOL defect[C]// 2021 IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Singapore, 2021.
[6] KARY CHIEN W T, YIN Y L. Apply DFT integrated enhanced EBAC methodology on defect isolations[J]. Journal of Failure Analysis and Prevention, 2018, 18(6): 1490-1502.
[7] CHOI H, HEO S, HONG H, et al. High resolution short defect localization in advanced FinFET device using EBAC and EBIRCh[C]// 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Chengdu, China, 2017: 1-4.
[8] KLEINDIEK S, SCHOCK K, RUMMEL A, et al. Current imaging, EBIC/EBAC, and electrical probing combined for fast and reliable in situ electrical fault isolation[J]. Microelectronics Reliability, 2016, 64: 313-316.
[9] RUMMEL A, JOHNSON G M, KEMMLER M, et al. Low-voltage EBIC investigation of fails[C]// 2021 IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Singapore, 2021: 1-6.
[10] HUBBARD W A, LINGLEY Z, THEISS J, et al. STEM EBIC for high-resolution electronic characterization[C]// 2020 IEEE International Reliability Physics Symposium (IRPS), Dallas, TX, USA, 2020: 1-5.
[11] VISWANATHAN V, JOHNSON G M, RUMMEL A, et al. Simple methods for evaluating junctions in IGBTs[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 81-85.
[12] MOLDOVAN G, COURBAT W. Strategies to identify physical origin of contrast in EBIRCH[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 277-283.
[13] WUDJUD W, DANG C, CHIN CHEONG K, et al. Applications of PVC and progressive FIB milling in identifying top-down invisible defect on advanced nodes SRAM devices[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 347-351.
[14] TING S L, TAN P K, PAN Y L, et al. Cross sectional passive voltage contrast approach for gate oxide breakdown defect isolation and visualization for TEM analysis[C]// International Symposium for Testing and Failure Analysis (ISTFA), Event Canceled, 2020: 362-369.
[15] DE WOLF P. Review of scanning probe microscopy methods for failure analysis[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: m1-m48.
[16] 王小. 基于电场力显微镜的有机小分子电荷捕获材料存储特性及其机制研究[D]. 南京: 南京邮电大学, 2017.
[17] WANG J, WANG X, XU W J, et al. Charge trapping behavior visualization of dumbbell-shaped DSFXPY via electrical force microscopy[J]. Journal of Materials Chemistry C, 2015, 3(48): 12436-12442.
[18] PALERMO V, PALMA M, SAMORì P. Electronic characterization of organic thin films by kelvin probe force microscopy[J]. Advanced Materials, 2006, 18(2): 145-164.
[19] SHIN C, KIM K, KIM J, et al. Fast, exact and non-destructive diagnoses of contact failures in nano-scale semiconductor device using conductive AFM[J]. Scientific Reports, 2013, 3: 2088.
[20] GANESH U. Laser voltage probing (LVP)–Its value and the race against scaling[J]. Microelectronics Reliability, 2016, 64: 294-298.
[21] KINDEREIT U, BOIT C, KERST U, et al. Comparison of laser voltage probing and mapping results in oversized and minimum size devices of 120 nm and 65 nm technology[J]. Microelectronics Reliability, 2008, 48(8-9): 1322-1326.
[22] ZHANG H G, KOCUN M, OHLER B, et al. Newly designed, faster, and more sensitive scanning capacitance microscope for failure analysis[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 434-437.
[23] SUN K, KARUPPANNAN S, CHONG S W, et al. Electrical fault isolation for functional and logic hard failures using laser voltage imaging[C]// International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 115-119.
[24] BREITENSTEIN O，SCHMIDT C，KARG D，et al. Thermal failure analysis by IR lock-in thermography[Z]. Microelectronics Failure Analysis Desk Reference, ASM International, 2004: 330-339.
[25] ALTES A, TILGNER R, REISSNER M, et al. Advanced thermal failure analysis and reliability investigations–Industrial demands and related limitations[J]. Microelectronics Reliability, 2008, 48(8-9): 1273-1278.
[26] LEE S, VAN VEENHUIZEN M. Complementary fault isolation procedures combining laser voltage probing/imaging and lock-in thermography: case studies [C]// Proceedings form the 48th International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 369-373.
[27] CHU C H, KUO P S, CHANG T F, et al. Failure analysis of IC contains FinFET[C]// 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Chengdu, China, 2017: 1-4.
[28] BODOH D, ERINGTON K. LADA and SDL: powerful techniques for marginal failures[C]// International Symposium for Testing and Failure Analysis (ISTFA). Pasadena, California, USA, 2021: c1 - c104.
[29] WEN L H，RUPA K. Enhanced CAD alignment techniques for FinFET devices[C]// Proceedings form the 48th International Symposium for Testing and Failure Analysis (ISTFA), Pasadena, California, USA, 2022: 110-114.
[30] JE M S, LIAN Y B, HUAT G S, et al. Application of soft defect localization technique for SRAM soft failure debug[C]// International Symposium for Testing and Failure Analysis (ISTFA). Houston, Texas, USA, 2014: 307-311.
[31] LI J L, WU C L. Soft Defect Localization (SDL) applied on analog and mixed-mode ICs failure analysis[C]// 2012 IEEE International Reliability Physics Symposium (IRPS), Anaheim, CA, USA, 2012: FA.6.1 - FA.6.5.
[32] WINSON L, ANGELINE P, RANGANATHAN G, et al. Root cause analysis on analog circuit using TR-LADA[C]// 2019 IEEE 26th International Symposium on Physical and Failure Analysis of Integrated Circuits (IPFA), Hangzhou, China, 2019: 1-5.
[33] 虞勇坚, 邹巧云, 吕栋, 等. 协同分析在集成电路失效定位中的应用探讨[J]. 电子与封装, 2017, 17(8): 36-40.
[34] EGGER P, GRüTZNER M, BURMER C, et al. Application of time resolved emission techniques within the failure analysis flow[J]. Microelectronics Reliability, 2007, 47(9-11): 1545-1549.

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

先进制程芯片失效定位技术现状及发展^*

Current Status and Development of Advanced Process Chip Failure Localization Technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	傅铮翔,李飞. 数字隔离器的失效分析及解决对策[J]. 电子与封装, 2023, 23(9): 90204-.
[2]	朱国灵;季振凯;纪萍;徐小明. 塑封倒装焊焊点开裂分析及改善研究[J]. 电子与封装, 2023, 23(2): 20204-.
[3]	梁为庆,梁胜华,邬晶,周升威,黄家辉,林凯旋,邱岳,潘海龙,方方. 板上驱动封装LED的电源IC失效分析^*[J]. 电子与封装, 2023, 23(10): 100204-.
[4]	贾玉伟;魏志宇;冀乃一. 限幅低噪声放大器增益下降失效分析[J]. 电子与封装, 2022, 22(4): 40402-.
[5]	李逵;张志祥;杨宇军;刘敏. 封装器件多应力叠加失效仿真分析与验证[J]. 电子与封装, 2022, 22(2): 20202-.
[6]	张波;李恭谨;秦培. 薄型塑封芯片钝化层损伤的失效分析与改进[J]. 电子与封装, 2022, 22(12): 120202-.
[7]	汪小青;虞勇坚;马勇;刘晓晔;吕栋. 集成电路检验/失效分析过程芯片去层制备方法[J]. 电子与封装, 2021, 21(8): 80404-.
[8]	王彬, 孙运涛, 司耸涛. 气体传感器模块的失效分析及解决对策^*[J]. 电子与封装, 2021, 21(12): 120102-.
[9]	孙运涛, 王彬, 王云飞, 虞勇坚. 电动车控制器中MCU失效分析及整改措施[J]. 电子与封装, 2021, 21(12): 120104-.
[10]	高嘉平, 王彬, 司耸涛, 虞勇坚. 热插拔损伤电路的失效分析及整改^*[J]. 电子与封装, 2021, 21(12): 120105-.
[11]	李文,李阳阳,朱晨俊,赵鸣霄. 导电胶粘接片式器件侧边胶量仿真优化与验证[J]. 电子与封装, 2020, 20(6): 60402-.
[12]	阮建新，肖培磊. 一种电路的静态损伤机理分析[J]. 电子与封装, 2019, 19(1): 44-48.
[13]	马杰. 钉头法倒装焊技术在声表面波器件生产中的应用[J]. 电子与封装, 2018, 18(2): 13-15.
[14]	周舟，林罡，于永洲，郭啸，贾洁. 基于EMMI技术的GaAs多功能芯片的失效分析[J]. 电子与封装, 2018, 18(11): 40-43.
[15]	陈松，王友彬. 漏电流的伏安特征曲线在分立器件失效分析中的应用[J]. 电子与封装, 2018, 18(11): 44-47.