[1] YANG L, LI T J. A new thin-film encapsulation technology for organic light-emitting devices [J]. Journal of optoelectronics Laser, 2014, 25(5): 840-844. [2] YANG D, YANG Y Q, DUAN Y, et al. Passivation properties of UV-Curable polymer for organic light emitting diodes[J]. Ecs Solid State Letters, 2013, 2(9): 31-33. [3] KIM L H, JEONG Y J, AN T K, et al. Optimization of Al2O3/TiO2 nanolaminate thin films prepared with different oxide ratios, for use in organic light-emitting diode encapsulation, via plasma-enhanced atomic layer deposition[J]. Physical Chemistry Chemical Physics, 2016, 18(2): 1042-1049. [4] GRAFF A, ALTMANN F, DZWILEWSKI A, et al. Analytical ETL/EML layer investigation of blue OLEDs[C]// Microscopy and Microanalysis, 2014(53):144-145. [5] KOHARI Z, KOLLAR E, POHL L, et al. Nonlinear electro-thermal modeling and field-simulation of OLEDs for lighting applications II: Luminosity and failure analysis[J]. Microelectronics Journal, 2013, 44(11):1011-1018. [6] WANG F K, LU Y C. Useful lifetime of white OLED under a constant stress accelerated life testing[J]. Optical & Quantum Electronics, 2015, 47(2):323-329. [7] RIEDEL D, DLUGOSCH J, WEHLUS T, et al. Extracting and shaping the light of OLED devices[C]//Organic Light Emitting Materials and Devices XIX. International Society for Optics and Photonics, 2015:1364. [8] SU S H, HOU C C, SHIEH R S, et al. Enhancing efficiency of organic light-emitting diodes using lithium-doped electron transport layer[J]. Japanese Journal of Applied Physics, 2008, 47(4):3193-3195. [9] SINGH A, NEHM F, MULLER-MESKAMP L, et al. OLED compatible water-based nanolaminate encapsulation systems using ozone based starting layer[J]. Organic Electronics, 2014, 15(10):2587-2592. [10] MIN H O, PARK E K, KIM S M, et al. Long-term stability of SiNx thin-film barriers deposited by low temperature PECVD for OLED[J]. 2016, 5(5):55-58. [11] JIMBO Y, TAMATSUKURI Y, ITO M, et al. Reliability and mechanical durability tests of flexible OLED with ALD coating[J]. Journal of the Society for Information Display, 2016, 23(7):313-318. [12] KIM H J, HYUN PARK S, KIM Y J, et al. Formation of a bilayer of low-temperature CVD-SiO2 and Sputtered Al2O3 films on polyethylene terephthalate substrates for OLED encapsulation Layer[C]// Electrochemical Society Meeting Abstracts 224. 2013 (2):59-59. [13] LIFKA H, TANASE C, MCCULLOCH D, et al. 53.4: Ultra-thin flexible OLED device[J]. Sid Symposium Digest of Technical Papers, 2007, 38(1):1599-1602. [14] KIM B J, PARK H, SEONG H, et al. A single-chamber system of initiated chemical vapor deposition and atomic layer deposition for fabrication of organic /inorganic multilayer films[J] Advanced Engineering Materials, 2017,19( 6): 1600819. [15] LEE L,YOON K H,JUNG J W, et al. Ultra gas-proof polymer hybrid thin layer[J]. Nano Lett. 2018, 18(9): 5461-5466. [16] 彭荣. OLED封装薄膜水汽透过率测试方法研究[J]. 电子与封装,2020, 20(2): 020203. [17] YU D, YANG Y Q, CHEN Z, et al. Recent progress on thin-film encapsulation technologies for organic electronic devices[J]. Optics Communications, 2016, 362: 43-49. [18] SCHUBERT S, KLUMBIES H, MLLER-MESKAMP L, et al. Electrical calcium test for moisture barrier evaluation for organic devices[J]. Review of Scientific Instruments, 2011, 82(9): 094101.
|