中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

导航

电子与封装 ›› 2021, Vol. 21 ›› Issue (2): 020303 . doi: 10.16257/j.cnki.1681-1070.2021.0205

• 电路设计 • 上一篇    下一篇

基于皮尔斯振荡器的8 MHz晶振电路设计

邵颖飞,鲁征浩   

  1. 苏州大学电子信息学院,江苏 苏州 215006
  • 收稿日期:2020-05-09 出版日期:2021-02-24 发布日期:2020-09-14
  • 作者简介:邵颖飞(1994—),女,江苏无锡人,硕士研究生,主要研究方向为模拟集成电路设计。

Design of 8 MHzCrystal Oscillator Circuit Based on Pierce Oscillator

SHAO Yingfei, LU Zhenghao   

  1. School ofElectronic and Information Engineering, Soochow University, Suzhou215006, China
  • Received:2020-05-09 Online:2021-02-24 Published:2020-09-14

摘要: 分析了石英晶体的等效模型和性能参数,设计了一款基于皮尔斯振荡器的8 MHz晶振电路,主要包括皮尔斯电路、使能控制及隔离电路、偏置电路和整形及电平移位电路。针对数字电路时钟为方波且数字电压域与模拟电压域不同的问题,设计了一个整形及电平移位电路,将晶体振荡器输出的正弦波整形成方波,且电路实现了双电压域工作。基于华宏0.11 μm 4P5M CMOS工艺,使用Cadence Spectre对设计的电路进行仿真。结果显示,当电源电压为3.3 V时,该晶振电路的输出频率为8 MHz,起振时间为0.35 ms,输出波形的占空比为49.89%,工作电流为350 μA。

关键词: ?晶振电路, 整形电路, 电平移位

Abstract: The equivalent model and performance parameters of quartz crystal are analyzed, and an 8 MHz crystal oscillator circuit based on Pierce oscillator is designed. It mainly includes Pierce circuit, enable control and isolation circuit, bias circuit and shaping and level shift circuit. Aiming at the problem that the digital circuit clock is a square wave and the digital voltage domain is different from the analog voltage domain, a shaping and level shift circuit is designed to shape the sine wave output by the crystal oscillator into a square wave, and it can work in dual voltage domain. Based on HHGRACE 0.11 μm 4P5M CMOS process, using Cadence Spectre to simulate the designed circuit, the results show that when the power supply voltage is 3.3 V, the output frequency of the crystal oscillator circuit is 8 MHz, the start-up time is 0.35 ms, and the output waveform accounts for 49.89% of the air and the operating current is 350 μA.

Key words: crystaloscillator, shapingcircuit, levelshifter

中图分类号: