[1] 李志光, 胡曾铭, 张江陵, 等. 大尺寸有机基板的材料设计与封装翘曲控制[J]. 电子与封装, 2024, 24(2): 020106. [2]周帅林, 孟凡义, 张领, 等. 有机封装基板常见失效模式与制程控制[J]. 电子与封装, 2024, 24(2): 020109. [3] FU S, YANG Z C, LI J T. Progress of high strength and high thermal conductivity Si3N4 ceramics for power module packaging[J]. Journal of Inorganic Materials, 2023, 38(10): 1117. [4] KHOONG L E, TAN Y M, LAM Y C. Overview on fabrication of three-dimensional structures in multi-layer ceramic substrate[J]. Journal of the European Ceramic Society, 2010, 30(10): 1973-1987. [5] LAI Y Y, PAN K, PARK S. Thermo-mechanical reliability of glass substrate and through glass vias (TGV): a comprehensive review[J]. Microelectronics Reliability, 2024, 161: 115477. [6] PAWAR K, DIXIT P. A critical review of copper electroless deposition on glass substrates for microsystems packaging applications[J]. Surface Engineering, 2022, 38(6): 576-617. [7] 吉力小兵, 张继华. 玻璃基三维集成技术领域系列研究新进展[J]. 电子与封装, 2024, 24(3): 030601. [8] 纪执敬, 凌惠琴, 吴培林, 等. 玻璃通孔三维互连镀铜填充技术发展现状[J]. 电化学, 2022, 28(06): 46-65. [9] AHMED O, JALILVAND G, POLLARD S, et al. The interfacial reliability of through-glass vias for 2.5D integrated circuits[J]. Microelectronics International, 2020, 37(4): 181-188. [10] AHMED O, OKORO C, POLLARD S, et al. The effect of materials and design on the reliability of through-glass vias for 2.5D integrated circuits: a numerical study[J]. Multidiscipline Modeling in Materials and Structures, 2020, 17(2): 451-464. [11] OKORO C, JAYARAMAN S, POLLARD S. Understanding and eliminating thermo-mechanically induced radial cracks in fully metallized through-glass via (TGV) substrates[J]. Microelectronics Reliability, 2021, 120: 114092. [12] SHIH M, CHEN K R, LEE T, et al. FE simulation model for warpage evaluation of glass interposer substrate packages[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2021, 11(4): 690-696. [13] 刘丹, 乌李瑛, 田苗, 等. 玻璃通孔成型工艺及应用的研究进展[J]. 微纳电子技术, 2025, 62(4): 55-75. [14] CHANG Y H, LIN Y M, LEE C Y, et al. Through glass via (TGV) copper metallization and its microstructure modification[J]. Journal of Materials Research and Technology, 2024, 31: 1008-1016. [15] 叶刚, 柯峥, 夏晨辉, 等. 基于激光诱导改性法制备多孔径石英玻璃通孔的工艺研究[J]. 中国集成电路, 2024, 33(7): 66-69. [16] ONITAKE S, INOUE K, TAKAYAMA M, et al. TGV (thru-glass via) metallization by direct Cu plating on glass[C]// 2016 IEEE 66th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA, 2016: 1316-1321. [17] LIU X, CHEN Q, DIXIT P, et al. Failure mechanisms and optimum design for electroplated copper Through-Silicon Vias (TSV)[C]// 2009 59th Electronic Components and Technology Conference, San Diego, CA, 2009: 624-629. [18] 丁伟, 姜凯, 孟令波, 等. 新能源汽车零部件静电喷涂工艺研究[J]. 汽车测试报告, 2024(13): 5-7.
|