不同规格色素炭黑对环氧塑封料性能的影响

doi:10.16257/j.cnki.1681-1070.2022.0914

电子与封装 ›› 2022, Vol. 22 ›› Issue (9): 090206 . doi: 10.16257/j.cnki.1681-1070.2022.0914

不同规格色素炭黑对环氧塑封料性能的影响

曹二平^1,2;蔡晓东²;牟海燕^1,2

1.衡所华威电子有限公司上海衡锁电子分公司，上海　200120；2. 衡所华威电子有限公司，江苏连云港　222006

收稿日期:2022-04-15 出版日期:2022-09-22 发布日期:2022-05-17
作者简介:曹二平（1990—），男，湖南郴州人，硕士，工程师，主要从事环氧塑封料开发工作。

Influence of Different Specifications of Pigment Carbon Blackon Properties of Epoxy Molding Compound

CAO Erping^1,2, CAI Xiaodong², MOU Haiyan^1,2

1.HysolHuawei Electronics Co., Ltd. Shanghai Hengsuo Electronics Branch, Shanghai 200120, China; 2.Hysol HuaweiElectronics Co., Ltd., Lianyungang 222006, China

Received:2022-04-15 Online:2022-09-22 Published:2022-05-17

摘要/Abstract

摘要： 以多芳型环氧树脂为基体树脂，多芳型酚醛树脂为固化剂，研究了不同规格色素炭黑对环氧塑封料性能的影响。通过凝胶化时间、螺旋流动长度、邵氏热硬度、体积电阻率、离子电导率和激光打标清晰度等对其进行表征。结果表明，适当降低炭黑吸油值，对环氧塑封料理化性能影响较小，同时有利于提高环氧塑封料的电绝缘性能和激光打标效果。当用原生粒径为21 nm、炭黑吸油值为65 ml/100 g的JY 2021炭黑时，环氧塑封料的凝胶时间为37 s，螺旋流动长度为150 mm，邵氏热硬度为72，体积电阻率为14.7× 10¹⁵ Ω·cm，此时离子电导率曲线最低，黑度及激光打标清晰度综合性能最好。

关键词: 环氧塑封料, 炭黑, 电性能, 激光打标

Abstract: The effect of specifications of pigment carbon black on the properties of epoxy molding compound was studied by using multi aromatic epoxy resin as matrix resin and multi aromatic phenolic resin as curing agent. It was characterized by gel time, spiral flow length, Shore hardness, volume resistivity, ionic conductivity and laser marking clarity. The results show that reducing the oil absorption value of carbon black has little influence on the Physicochemical properties of epoxy molding compound, and is beneficial to improve the electrical insulation performance and laser marking effect of epoxy molding compound. When JY 2021 carbon black with original particle size of 21 nm and oil absorption value of 65 ml/100 g was used, the gel time of epoxy molded plastic was 37 s, the spiral flow length was 150 mm, the shore hot hardness was 72, the volume resistivity was 14.7× 10¹⁵ Ω·cm, and the ionic conductivity curve was the lowest, blackness and laser marking clarity have the best comprehensive performance.

Key words: epoxy molding compound, carbon black, electrical property, laser marking clarity

中图分类号:

曹二平, 蔡晓东, 牟海燕. 不同规格色素炭黑对环氧塑封料性能的影响[J]. 电子与封装, 2022, 22(9): 090206 .

CAO Erping, CAI Xiaodong, MOU Haiyan. Influence of Different Specifications of Pigment Carbon Blackon Properties of Epoxy Molding Compound[J]. Electronics & Packaging, 2022, 22(9): 090206 .

[1]	曹二平. 环氧树脂及酚醛树脂黏度对环氧塑封料性能的影响[J]. 电子与封装, 2024, 24(1): 10202-.
[2]	王璐;常白雪;岳艺宇;吴宇林;吴昊;陈淑静;刘金刚. 环氧塑封料用热潜伏型固化促进剂的研究与应用进展^*[J]. 电子与封装, 2022, 22(9): 90201-.
[3]	崔朝探, 陈政, 杜鹏搏, 焦雪龙, 曲韩宾. X波段小型封装GaN功率放大器设计 [J]. 电子与封装, 2022, 22(6): 60202-.
[4]	王殿年;李泽亮;郭本东;段嘉伟. 第三代半导体器件用高可靠性环氧塑封料的制备[J]. 电子与封装, 2022, 22(11): 110202-.
[5]	王璐, 常白雪, 岳艺宇, 吴宇林, 吴昊, 陈淑静, 刘金刚. 绿色含溴阻燃剂在环氧塑封料中的应用研究^*[J]. 电子与封装, 2022, 22(10): 100201-.
[6]	潘旭麒;李进;袁健;程琪. 对于EMC封装模具离型性的改良研究[J]. 电子与封装, 2021, 21(6): 60201-.
[7]	潘旭麒, 李进, 袁健. EMC中脱气剂的应用研究[J]. 电子与封装, 2021, 21(12): 120201-.
[8]	王殿年;郭本东;杨春梅. 非等温DSC研究EMC的固化动力学[J]. 电子与封装, 2020, 20(9): 90203-.
[9]	赵丹, 邹嘉佳, 方南军. 微波复合介质板的介电性能验证研究[J]. 电子与封装, 2020, 20(1): 10101-.
[10]	郭利静，张力红，武红娟，代瑞慧. 常用树脂对IC封装用环氧塑封料性能影响[J]. 电子与封装, 2019, 19(9): 19-23.
[11]	王鹢奇. 基于0.13 μm工艺的1.5 V低功耗MOSFET器件设计[J]. 电子与封装, 2019, 19(1): 37-40.

中国半导体行业协会封装分会会刊

中国电子学会电子制造与封装技术分会会刊

不同规格色素炭黑对环氧塑封料性能的影响

Influence of Different Specifications of Pigment Carbon Blackon Properties of Epoxy Molding Compound

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价